The Keefe Report: 224 Valkyrie—Rightly, The Next Big Thing

by
posted on October 30, 2017
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
val_keefe_2.jpg

Last month, I found myself trying to get into the prone position behind the new 224 Valkyrie cartridge. It had been a while since I've shot prone at 1,000 yards. and at first, I just wasn't as steady as I could've been. 

I'll tell you what was steady, though—the performance of the .224 Valkyrie cartridge. I was at the Valdina Ranch in Texas, ostensibly to shoot doves with my longtime friend Drew Goodlin, who runs center-fire rifle products for Federal Premium Ammunition, but he and the rest of the Federal crew had a surprise for me one morning. It's not often you get to be in on the ground floor of the next big thing. And I think the 224 Valkyrie is the next big thing. 

The .224 Valkyrie, from a 24” barrel, propels a high BC 90-gr. Sierra MatchKing at 2700 f.p.s at the muzzle and it stays supersonic out to 1,300 yards. There were several guns there, including a couple from Savage, but the first I shot was a LaRue Tactical with a 1:7” twist that has been used by Federal's skunk works guys in developing the cartridge.

It's obvious that the AR platform is the most popular in America. But the cartridge getting all the hype these days is the 6.5 mm Creedmoor. The thing about the Creedmoor, though, is it needs a 7.62 mm size platform. Think AR-10 size in an autoloader. And after firing a few magazines of .224 Valkyrie, the 6.5 mm Creedmoor felt like a cannon. The .224 is soft-shooting, hardly discernible from a .223.

Some years ago, the Saudi Royal Guard Regiment adopted an LWRCI rifle chambered in 6.8x43 mm SPC. When a military unit the size of the Royal guard buys a new rifle and a relatively new cartridge, they need ammunition. Lots of it. 

The ammunition side of that contract was fulfilled by Federal Premium Ammunition, and Federal not only filled the contract, but the company learned how to make 6.8 cases. As matter fact, the factory in Anoka, Minn., became very, very good at it.

The thing about really knowing how to make 6.8 cases is that this new cartridge, necked down to .224, is designed for manufacture. Federal will be able to produce ammunition at a fairly inexpensive cost. How inexpensive? How about American Eagle costing under $14 a box.


While 6.8x43 mm cartridge has been somewhat on the wane, as has the excellent 6.5 mm Grendel designed by Bill Alexander, the AR platform in something other than 5.56 mm has been an area a lot of companies have been focusing. Heard of .300 Blackout, have you? The most recent, of course, is the 22 Nosler.

What the .224 Valkyrie offers, though, is a cartridge that nips at the heels of the 6.5 Creedmoor in terms of ballistic performance, but in a cartridge case that will fit inside a .223/5.56 mm platform. 

Federal has released some information but is holding some close still, but I can tell you that it's real. I watched Drew and others nail the 1,000-yd. targets time after time, after time. There were also some other very experienced long-range shooters there who dropped the .224 Valkyrie on target so often that it became almost monotonous. And then I stepped back up, focused on the fundamentals and started ringing steel, too.

This is a cartridge that will cross multiple applications. The round we were shooting was a Federal Gold Medal 90-gr. Sierra MatchKing, which will be popular with the guys shooting PRS with semi-automatics. But also there's a 60-gr. Nosler Ballistic Tip for varminters and then a 100-gr. Fusion, which should be popular in states that allow cartridges under .243 to be used on deer.

Then there is a 75-gr. TMJ American Eagle loading that will do what the other cartridges trying to make headway cannotand that's be affordable.

Right out of the gate, several manufacturers are producing rifles in .224 Valkyrie: Savage, JP Enterprises, Masterpiece Arms, Seekins, LWRCI, LaRue, LMT Defense, Q LLC, Mossberg, Barrett and CMMG,, to name a few. How much do I think of this new cartridge? At a Texas airport I called a longtime friend at one of the biggest gun manufactures in the country, and told him to get off the fence. This is the next big thing. Because it should be. I have a short-action Remington Model 700 in .223 that needs to be rebarreled anyway, and its next one will be stamped “.224 Valkerie.”

Check out this video from the Federal Premium website to see the 224 Valkyrie in action. 




   
GM224VLK1   224 Valkyrie 90-gr. Gold Medal Sierra MatchKing   6-04544-63027-5 $31.95 


P224VLKBT1   224 Valkyrie 60-gr. Nosler Ballistic Tip  6-04544-63028-2  $29.95 



 F224VLKMSR1  224 Valkyrie 90-gr. Fusion MSR  6-04544-63030-5  $28.95 



AE224VLK1   224 Valkyrie 75-gr. American Eagle TMJ  6-04544-63029-9  $13.95 

 

Latest

Women outside with rifle on rest
Women outside with rifle on rest

Three Hidden Joys of the Rifle

There is a particular jolt of joy when a shooter nestles behind a perfectly stable rifle and puts the ideal bullet exactly where intended.

New For 2026: Smith & Wesson M&P15 AXE

The new Smith & Wesson M&P15 AXE is not only the latest in the company's series of AR-style rifles, it marks the first S&W rifle to be chambered for the .300 Blackout cartridge.

The Armed Citizen® July 27, 2026

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Making Sense of Conflicting Court Rulings on the AR-15

Various and often conflicting judicial rulings on AR-15s tees up this critical constitutional issue for the U.S. Supreme Court, which has agreed to hear cases challenging bans of these popular semi-automatic in the coming term.

Skills Check: The Meltdown Drill

Our drill this month trains you to acquire a multi-round-durable grip from the start and continually pressure-test it under time and transition stress, holding you to an all-clean-hits standard.

EAA Corp. Acquires Manufacturing Facility in Tennessee

European American Armory’s recent acquisition of a large manufacturing facility in Mountain City, Tenn., is further evidence that the firearm importer plans to establish a domestic manufacturing presence.

Interests



Get the best of American Rifleman delivered to your inbox.