Ruger Issues Product Safety Bulletin for Some 9 mm Ruger American Pistols

by
posted on October 10, 2018
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
rugeramerican.jpg

Sturm, Ruger & Company, Inc. has issued a product Safety Bulletin for certain Ruger American Pistols chambered in 9 mm.

A press release issued today reads as follows:

"Ruger has discovered that some Ruger American Pistols chambered in 9mm may exhibit premature wear of the locking surfaces between the slide and barrel which, if ignored, can result in a crack developing near the ejection port of the slide. This typically does not occur at round counts below 10,000 rounds. The condition is easily identified during routine maintenance and cleaning, and the crack should be visible long before the pistol becomes unsafe to shoot. Ruger is committed to safety and is asking owners of Ruger American Pistols chambered in 9mm to inspect their pistols for excessive wear or cracks and, if necessary, sign up for a FREE retrofit. Ruger American Pistols chambered in .45 Auto are not subject to this Safety Bulletin.

All Ruger American Pistols chambered in 9 mm with serial number prefixes “860” and “862” are subject to this Safety Bulletin and should be inspected. Ruger American Pistol owners should visit the Ruger American Pistol Retrofit Website at Ruger.com/APRetrofit to look up the serial number to determine if their Ruger American Pistol is subject to the Safety Bulletin, learn how to inspect their pistol to determine whether the retrofit is necessary, obtain additional information, and sign up for the retrofit if required.Replacement components are being built and consumers who sign up for the retrofit will be served on a first-come, first-served basis. Those consumers will be sent a U.S. Postal Service box with a prepaid shipping label and detailed packaging and shipping instructions. The consumer should return only the barrel/slide assembly to Ruger. Ruger will inspect the barrel/slide assembly and install new components as needed, free of charge. The Company will make every effort to return each barrel/slide assembly within one week of the day it arrives at Ruger.

Ruger reminds consumers that periodic inspection of any firearm is important to ensuring its safe operation. You should clean and inspect your firearm after each range session. Proper maintenance increases the longevity of your firearm and will allow early detection of worn or broken parts."

Latest

Phlster Enigma Micro Holster 1
Phlster Enigma Micro Holster 1

Review: PHLster Enigma Micro

Building on its initial Enigma design, PHLster Holsters now has its Enigma Micro system, which is designed for extremely compact handguns and deep concealment.

Standing Guard | Good and Growing

As we conclude our 250th anniversary year as a nation of freedom-cherishing Americans, I have great things to tell you.

Rifleman Review: Leupold VX-5HD Gen 2 Riflescopes

With its new generation of VX-5HD optics, Leupold has managed to add in a few new utility features that make it easier than ever to zero your riflescope and be ready for the field.

West/East Hybrid: The Grand Power ARAQ

With the Grand Power ARAQ, firearm enthusiasts no longer have to choose between AR and AK, as this design combines the best of both worlds.

Accurate, Compact & Compensated: The Wilson Combat Accu-Comp V-Series

For nearly half a century, Wilson Combat’s Accu-Comp has been the standard to beat in competition circles. Now the company is extending the features to its carry models with the Accu-Comp V-Series.   

Standing Off: How Planning for Longer Shots Enhances Your Defensive Plan

While the likelihood of a defensive shot at 200 yards or more is remote, being able to do so confidently makes close-range shots easier.

Interests



Get the best of American Rifleman delivered to your inbox.