Review: Benelli 828U Sport

by
posted on January 8, 2021
bensport.jpg

When Benelli introduced its 828U over-under at the 2015 Shooting, Hunting and Outdoor Trade Show (SHOT Show) some wondered if it wasn’t a gun too far. How wrong they were. The company’s newest variant is the 828U Sport, a version purpose-made for clay shooting. However, don’t lose sight of the fact that sporting clays is a sport designed to simulate shooting flying and running game, so the 828U Sport is equally at home in the field.

In fact, it might be even better on the hunt since the stock can be adjusted through 40 variations of comb drop and cast on or off, and a shotgun that shoots where you look is a killer. This feature is unique to the 828U over-under, as no other manufacturer offers a stock-adjustable over-under, which is accomplished by the rear of the action projecting a slight bit beyond the trigger guard—retaining the lines of the receiver while allowing the shims to be inserted.

forend
The 828U’s fore-end contains only the rod and Anson-style latch mechanism that release it, allowing the barrels to be detached from the receiver.


While we’re talking about the stock, the Sport includes a set of tungsten balancing weights that are stacked inside the butt, allowing the shooter to change the handling to his or her particular taste. The AA-grade walnut has a matte oil-finished appearance, and the pistol grip and fore-end are carved in a fish-scale pattern as opposed to traditional diamond-point checkering. The fore-end is removed using an Anson-style rod, which we feel is the easiest to use fore-end latching system.

ejector
Selective ejectors lie alongside the barrels (arrow) and are powered by long coil springs that either kick out fired shells or raise unfired cartridges for easy removal by hand.


The action contains many innovations, the primary being Benelli’s Steel Locking System that moves the strain of ignition away from the hinge. Using the typical Italian design, the barrels pivot on trunnions in the bottom front of the action that mate with matching cuts on the bottom front of the monobloc.

We found that in assembling the barrels to the action they needed to be at nearly a right angle to the receiver to perfectly align the cuts and trunnions. The selective ejectors lie along the side of the barrels, hence none of their mechanism is in the fore-end. They use long coil springs to kick out fired shells or to raise the unfired cartridges for easy removal.

buttstock
The 828U Sport comes with a set of tungsten balancing weights that can be stacked inside the buttstock to tune the gun’s balance to suit the shooter’s preference.

Lying at the rear of the action is a vertical steel plate Benelli calls its Lock Plate System, with a curved notch at the base that engages a lip on the rear bottom of the barrels. It is this plate, machined to fully cover the breech end of the barrels when in battery, that receives the forces of firing upon ignition, minimizing the strain imparted onto the receiver itself.

The actual lockup is by way of a pair of cylindrical studs that project from the breechface above the locking plate and engage holes on each side at the top of the barrels. It’s the same locking system currently used by the great Boss & Co. and on many fine Italian over-under shotguns.

The action is opened by a traditional lever that is faintly checkered on the left side. It swings to the right, and about 80 percent through the stroke meets fairly stiff resistance that is felt until the breech unlocks. The Italian-style safety, with a barrel selector, is mounted on top of the rear tang. One nice feature is that the two barrels are indicated on the selector with recessed dots, with the first barrel to be fired highlighted in red, with the second in white.

benelli 828u sport shooting results

The trigger assembly is removable for cleaning and lubrication by means of a supplied wire tool. It can be inserted into a hole just to the rear of the trigger guard—the tool is specifically contoured to follow the shape of the rear of the guard—and upward pressure will release the trigger assembly. In addition, using the supplied 1.5-mm Allen wrench, the positioning of the trigger can be adjusted either forward or backward to best position it to fit the shooter’s finger length.

The 828U Sport’s 30" barrels (32" also available) are separated for all but the first five inches of their lengths and at the muzzle to provide increased cooling surfaces and, perhaps more importantly, lighter barrels for faster response to feathered or clay targets. The carbon-fiber ventilated rib is striated on both sides and topped with a white, Bradley-style front sight. Topping the very precisely bored (0.722", bottom; 0.723", top) barrels are 3½" screw-in choke tubes of which the last 3/4" extends beyond the muzzle. The chokes use a series of notches to delineate their constrictions.

At the patterning board shooting Estate Cartridge’s 1-oz., No. 7½ target loads from 40 yds., the improved cylinder and modified chokes produced 47 percent and 57 percent patterns, respectively, which are excellent results for use against either clay or real pigeons. The 828U may have been a departure at the time for Benelli, but we’ve found the design to be an innovative one, worthy of its rather upscale price tag—and the changes made to the Sport result in an even more versatile and competition-ready over-under.

Benelli 828U Sport specs

Latest

French resistance fighters with no. 4 enfield rifle bren machinegun world war ii
French resistance fighters with no. 4 enfield rifle bren machinegun world war ii

I Have This Old Gun: French Resistance No. 4 Lee-Enfields

Among all of the No. 4 rifles made throughout World War II, this relatively small batch of guns has a unique history that bears witness to some of the bravest fighters of the war: the French resistance.

New For 2025: Taurus 650

For 2025, Taurus re-introduced its "hammerless" revolver design with the 650, which provides double-action-only operation and a shrouded hammer for a seamless, snag-free profile.

I Have This Old Gun: Norinco Model 320

The Uzi submachine gun is one of the most iconic and recognizable firearms of the 20th century. As a highly successful design with more than 10 million produced to date, it has spawned numerous copies, licensed and otherwise, and has been manufactured everywhere from Belgium to southeast Asia.

Henry Repeating Arms Donates To First Responders Children’s Foundation

Henry Repeating Arms recently donated another $25,000 to the First Responders Children’s Foundation at a celebratory National First Responders Day event in New York City’s Times Square.

Review: Cimarron Cavalry Model Henry Nettleton

While the Colt Single Action Army (SAA), which celebrated its 150th birthday in 2023, is still being made by the company that first brought it into existence, the popularity of the design and its connection with martial and frontier history has created a vibrant market for derivatives, many of which are produced in Italy.

The Armed Citizen® Dec. 23, 2024

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Interests



Get the best of American Rifleman delivered to your inbox.