The General-Purpose Handgun: One Concept to Consider

by
posted on September 10, 2020
genpurp.jpg

While thinking about the topic of the “general-purpose” rifle, I began to consider what a corollary handgun setup might look like—something useful for everything from target shooting to self-defense to game hunting, along with protection in black bear or big-cat country.

It didn’t take long to realize that, for such a versatile role, the revolver still has a lot to recommend it. A good example will typically address the aforementioned requirements with an excellent single-action trigger, good mechanical reliability, vast ammunition options and greater power than semi-automatics of comparable size. Granted, that’s not to suggest that a semi-automatic couldn’t fill the general-purpose-handgun role, but that, for some, a revolver could be preferable.

Specifically, the project I envisioned involved starting with a tough, easy-to-maintain, medium-frame revolver chambered in .357 Mag. and featuring a fully adjustable rear sight, a “compromise” barrel length of about 4" and, preferably, stainless steel construction—all carried in one of two practical belt holsters depending on the circumstances.

As I thought about those preferences, I settled on a platform with which I was quite familiar: Ruger’s long-discontinued Security-Six. I had owned several through the years, but eventually traded them in for sleeker, more capacious semi-automatics. Still, the Six series (including the fixed-sight Service and round-butt Speed) remains highly regarded even today for several reasons: durability, even with the steady use of heavy loads; maintainability, by way of a solid frame that can be fieldstripped without tools; and shootability, thanks to a smooth trigger of moderate weight.

revolver


As good as the Security-Six is, though, I still felt it could benefit from some carefully chosen enhancements. The first was
a DXW tritium Standard Dot front sight (1.) and V-style, white-stripe rear sight (2.) ($110) from XS Sights (xssights.com). They make it easier to get the gun on target quickly and still allow for fairly precise shooting at longer ranges. There is a bit of handwork required to file the front sight base to fit into the factory recess and then drill it through to fit the factory roll pin, but the result is well worth the effort.

I also decided that a textured rubber Monogrip (3.) ($30) from Hogue (hogueinc.com) would be more hand-filling than the factory stocks and allow for a much more secure purchase on the gun. Its rubberized exterior also mitigates the recoil of heavy magnum loads and minimizes movement of the gun in the hand as the trigger is pulled through its long double-action arc. I secured the Monogrip to the frame with a Ruger/Hogue Lanyard Ring (4.) ($50) from custom revolver icon Hamilton Bowen (bowenclassicarms.com).

Its stud threaded directly into the grip’s factory mounting stirrup threads. Why a lanyard ring? On that I have to agree with Bowen’s website, which states, “Gun retention is a vital concern for hand gunners in risky environments. Lanyards and lanyard rings are still the best way to keep control of your sidearm when on horseback, around water or in hostile circumstances.” The lanyard itself came from a box of military surplus gear at a gunshow, and its free-spinning snap clips directly onto the silver-soldered, stainless steel ring.

revolver accessories


After thinking about holsters for the Ruger, I settled on two options—one for concealed carry and one for field use. The first is a Thumb Break Scabbard
(5.) ($79) from Desantis (desantisholster.com), along with two of the company’s Second Six Speedloader pouches (6.) ($52 each). Made of vegetable-tanned cowhide with detailed boning, the set carries the revolver and two MK3A polymer and aluminum speedloaders (7.) ($11) by HKS (hksspeedloaders.com) in a secure, low-profile manner on a good-quality 1 1/2" gun belt.

The second rig was a flea market find
UM84R military-style ballistic nylon flap holster (8.) by Bianchi (safariland.com) that I paired with a nylon HKS double speedloader holder (9.) ($15). It complements the gun and speedloaders’ weather-resistant qualities, keeping them protected and accessible on a nylon belt, even if worn outside a parka in the foulest weather.

Swapping out ammunition types—or even alternating them within the same cylinder—makes this a versatile rig that can address a wide range of scenarios using everything from personal defense loads to hunting types, such as shot and hardcast.

While the entire outfit may not be as compact or offer as many rounds onboard as one based on a semi-automatic, it nonetheless serves quite well for “general-purpose” use and is a fine-shooting, dependable, versatile and powerful workhorse that has never let me down.

Latest

John Parker flowing piece flintlock muzzleloader right-side view on white background
John Parker flowing piece flintlock muzzleloader right-side view on white background

Captain John Parker's Fowler: Witness To History

While thousands of firearms were used in and around the Massachusetts towns of Lexington and Concord on April 19, 1775, few survive today. One survivor is the flintlock fowler used by Capt. John Parker of the Lexington militia.

New For 2025: Mossberg 590M Standoff & 500 Slugster Pump Shotguns

The Mossberg 500 is one of the most popular pump-action shotguns ever made. That doesn’t keep the company from making updates and improvements, as evidenced in the new-for-2025 590M Standoff and 500 Slugster series.

Preview: Warthog Sharpeners V-Sharp Elite A4

Warthog USA’s V-Sharp Elite A4 pairs the company’s most feature-packed portable blade-sharpening unit with a detachable wooden base for added stability.

The Men & Guns Of Lexington Green

On April 19, 1775, 250 years ago, approximately 80 armed militiamen from Lexington gathered on their village green to confront several hundred British infantrymen. The events of that morning began a conflict that would ultimately establish the United States of America.

"Battle Road" & The British Retreat To Boston: 250 Years Later

After the fights at Lexington and Concord's North Bridge, the British column had to return to Boston. On its way, the regulars were set upon by hundreds, then thousands, of armed militiamen hell bent on revenge.

Preview: Hawke Airmax 2-7X 32 mm AO

Shooters looking to add optics to their air rifles should choose airgun-specific scopes such as those in Hawke’s Airmax line—which offers four models.

Interests



Get the best of American Rifleman delivered to your inbox.