I Have This Old Gun: Colt Model 1851 London Navy

london.jpg

The Model 1851 Navy was one of Colt’s most popular cap-and-ball “belt pistols,” and more than 250,000 were produced between 1851 and 1873. But approximately 42,000, bearing their own set of serial numbers, were manufactured in London, rather than Hartford, Conn.—an interesting variation for collectors.

The Model 1851 Navy was introduced at London’s Great Exhibition that same year, where it garnered enough orders to encourage Colt to open a factory in London. Until machinery and workers could be established, however, Colt had parts from Hartford sent to London for assembling, finishing and proofing. It wasn’t until 1854 that the first truly “London-made” Colt Navies came off the assembly line.

That was just after the outbreak of the Crimean War. As a result, during that first year, Colt shipped more than 10,000 London Navies to Russia’s Baltic Fleet and another 9,000 pistols to British troops. Colt’s London factory soon began receiving distinguished visitors, including Prince Albert and Charles Dickens, who praised the factory by stating, “It is the only place in England where one can see the complete manufacture of a pistol, from dirty pieces of timber and rough bars of cast steel, till it is fit for the gunsmith’s case.” But in 1856, with the end of the war and Parliament urging citizens to “buy British,” orders slowed and Colt closed the London factory.

Aside from the initial 2,000 First Model London Navies assembled from Hartford-shipped parts, which featured brass backstraps and the smaller trigger guards of the Third Model Navy, the London model resembled the 1851 Fourth Model, with large, round, silver-plated or blued steel backstraps. Frames, hammers and rammers were color-casehardened; the rest of the gun was blued. Barrels were stamped “ADDRESS. COL COLT. LONDON,” with British proofmarks stamped on the cylinder between each nipple and to the left of the barrel lug. Stocks were one-piece walnut and the cylinder sported the Ormsby naval battle scene. Engraved revolvers exhibit England’s finest artistry from the time.

This cased Second Model London Navy—made in 1855—still retains much of its blued finish and color-casehardening, sports a silver-plated backstrap and trigger guard, and is marred only by scratches on one of the barrel flats and minor pitting on the frame. It obviously was kept in its fully accessorized case, which includes an extra set of nipples. By itself, this 80 percent gun would fetch $4,500, but with its original case, it is easily worth $7,500 to $8,000.

Gun: Colt 1851 London Navy (cased)
Caliber: .36
Serial No: 25950
Manufactured: 1855
Condition: NRA Fine (Antique Gun Standards)
Value: $7,500 to $8,000

Latest

heavy machine gun crew with DShK on tripod pointing in air above trees
heavy machine gun crew with DShK on tripod pointing in air above trees

Red Fifty: The Soviet 12.7 mm DShK Heavy Machine Gun

While the Browning .50-cal. M2 machine gun has been unequaled for more than a century, John Moses Browning’s genius design has had one significant 12.7 mm competitor: the Soviet DShK.

Support The NRA Youth Education Summit (YES) On Giving Tuesday

With more than 1,200 students having graduated from the program and over $700,000 in scholarships awarded since 1996, NRA's YES is an immersive leadership program for high school students eager to learn about the foundations of our nation, the importance of civic engagement and the role of the Second Amendment.

Rifleman Review: Remington 360 Buckhammer

Remington Ammunition's 360 Buckhammer is a straight-wall hunting cartridge that's designed to give deer hunters an ideal round for their Midwestern hunt.

New For 2025: EAA Girsan Witness2311 Brat, Match and MatchX

European American Armory Corp. (EAA) introduced an affordable variation of the double-stack 1911 design with their Girsan Witness2311 in 2023, continually adding additional chamberings and slide length options. New for 2025, the company is adding three new versions of the Witness2311 with the Match, MatchX and Brat models.

Review: Citadel Trakr

At less than 4 lbs., this repeating rifle is easy on the back while also being extraordinarily easy on the budget.

Freedom Munitions To Move Ammo Component Production To Idaho

Freedom Munitions has announced it will be consolidating its projectile component production from X-Treme Bullets out of Nevada into its Lewiston, Idaho, facilities.

Interests



Get the best of American Rifleman delivered to your inbox.