CMMG Unveils Mk4 V Series

by
posted on July 29, 2014
http___wwwamericanriflemanorg_videos_gotw-cmmg-mk4-rce.jpg

Whether it’s knocking down a long-range shot or tracking a moving target, speed and accuracy remain a shooter's main goals. To meet these challenges, CMMG has introduced the Mk4 V and Mk4 V2, both chambered in 5.56x45mm.

Both the Mk4 V and Mk4 V2 are equipped with a 24-inch fluted 416 stainless steel barrel designed to extract the utmost performance out of each round. The fluting on the barrel reduces the weight and also allows the barrel to dissipate heat more rapidly, thus cooling down faster.

The rifle also features CMMG’s RKM14 KeyMod hand guard, which offers three primary advantages:

  • Reduced Weight – Material is removed from the hand guard where the KeyMod slots are located making it lighter than traditional quad-rail hand guards.
  • Slimmer Profile – The absence of rails from the sides of the hand guard create a thinner profile that is easier for the average shooter to wrap their hand around and grip.
  • Easy Accessory Attachment – The KeyMod slots are found at the 3, 6 and 9 o’clock positions on the hand guard. Accessories that are KeyMod compatible can be attached directly to the slots, whereas accessories that are not KeyMod compatible can easily be attached by using one of CMMG’s 5-slot accessory rails.

A standard 1913 Picatinny rail runs atop the rifle from the charging handle to the front of the RKM14 hand guard for mounting optics.

The Mk4 V2 comes standard with a Geissele Automatics SSA two-stage trigger pre-installed. The Mk4 V2 comes with standard with a Magpul MOE pistol grip and buttstock and one 30-round Magpul PMAG. The Mk4 V2 is available now and the MSRP is $1,499.95.

The Mk4 V, is a less-expensive option and comes with CMMG’s renowned single-stage mil-spec trigger, an A2 pistol grip and an A1 butt stock. MSRP for the Mk4 V is $1,249.95.

CMMG Mk4 V2 Technical Specifications:Caliber:  5.56x45 mm
Barrel:  24" fluted medium contour, 1:8” twist
Hand Guard:  CMMG RKM14 KeyMod hand guard
Receiver:  Forged 7075-T6 AL
Trigger:  Geissele Automatics SSA two-stage
Furniture:  Magpul MOE Pistol Grip and Buttstock
Weight: 7.5 lbs unloaded
Length: 41.5”
Magazine: 30-round PMAG
MSRP:  $1,499.95

CMMG Mk4 V Technical Specifications:Caliber:  5.56x45 mm
Barrel:  24" fluted medium contour, 1:8” twist
Hand Guard:  CMMG RKM14 KeyMod hand guard
Receiver:  Forged 7075-T6 AL
Trigger:  Single Stage Mil Spec Trigger
Furniture:  A2 Pistol Grip and A1 Buttstock
Weight: 7.5 lbs unloaded
Length: 41.5”
Magazine: 30-round PMAG
MSRP:  $1,249.95

For more information, visit CMMG.com.

Latest

GAIM Immersive Technology introduced its VR shooting simulators
GAIM Immersive Technology introduced its VR shooting simulators

GAIM Introduces Virtual Reality To The Shooting Sports

GAIM Immersive Technology introduced its VR shooting simulators, a system designed for improving marksmanship fundamentals in a fun, safe and engaging way.

Rifleman Q&A: 00 Buckshot In 20 Gauge?

"I’ve been asking my local retailers for 20-ga. 00 buck shotshells. Their response is “good luck finding that.” Were these shells ever made available by any company?"

Preview: Delta 14 AR 15 Takedown Pin Set

The design of AR-15 receiver sets is such that most exhibit some degree of looseness when fit together using typical captured-detent takedown pins. Delta 14 has addressed that issue ...

Review: Stevens 334 Walnut

A tool for task completion, the Stevens Model 334 bolt-action rifle serves hunters with a simplistic design topped with a few modern niceties.

The Armed Citizen® Dec. 9, 2024

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

The Browning Model 1936

This Browning Model 1936 was never actually manufactured. Only a few were made, chambered for the French 7.65 Long, for French government trials.

Interests



Get the best of American Rifleman delivered to your inbox.