8 Things You Might Not Know About the Ruger Mini-14

posted on May 23, 2014
mini_400.jpg

Decades old and still vastly popular, Ruger's Mini-14 has few limits. The company's miniaturized version of the legendary M14, the Mini-14 is ideal for use on the farm and ranch, in the woods, at the range or for personal defense.

There’s a lot to say about any gun with that much history, so we decided to track down a few things you might not know about the famous rifle. Check out our eight facts below, and be sure to weigh in with your own in the comments.

8. The model’s name, Mini-14, is derived from the military’s M14 rifle. While developing the Mini-14, Ruger used the M14 as a base model for the new rifle-all the while incorporating a number of cost-saving alterations and innovations.

7. That said, the Mini-14 doesn’t share quite as much in common with the M14 as its name might suggest. Aside from shooting .223 Rem./5.56x45mm NATO rather than .308 Win./7.62x51mm NATO, the rifle uses a Garand style rotating bolt and simplified gas system.

6. It’s said Bill Ruger felt that, with better timing, the Mini-14 would have been the military’s choice as a successor to the M14. As we all know, history favored the AR-15 design that Colt had purchased from ArmaLite, instead, and the M16 was born.

5. The Ruger Mini Thirty, an evolution of the Mini-14, developed its own following upon its introduction in 1987. Yes, the Mini Thirty’s 7.62x39 mm chambering made it popular with owners of the venerable AK-47 build, but it made an impact on hunters, too-the cartridge’s ballistics were deemed more suitable for deer and similar game than the Mini-14’s .223 Rem.

4. The infamous 1986 FBI Miami shootout nearly single-handedly spurred the FBI and police departments around the country to begin carrying more powerful handguns. Why? During the fight, bank robber Michael Lee Platt did most of the regrettable incident’s damage while armed with his Mini-14, which possessed significantly more firepower than anything the responding law enforcement officials had brought with them.

3. At one point, Ruger began developing versions of the Mini-14 that were to be chambered in .308 Win. and .243 Win. Unfortunately, mechanical and production issues kept the rifles from ever being produced.

2. Like most of history’s more famous firearms, the Mini-14 has made its rounds in Hollywood. Versions of the rifle have popped up on screens large and small throughout the years, though the Mini-14’s most notable appearances probably came on “The A-Team.” During the show’s run, "Hannibal" Smith, Templeton "Faceman" Peck, "Howling Mad" Murdock and "B.A." Baracus were all seen with at least one prop variant of the rifle. What beats Mr. T and a Mini-14? That's a rhetorical question, mind you.

1. It’s possible, albeit difficult, to find a Ruger Mini-14 chambered in the .222 Remington cartridge. In an attempt to broaden its marketplace, Ruger once produced a number of rifles in .222 Rem. for sale in countries that prohibit civilian ownership of firearms that chamber military cartridges. The practice is a thing of the past, making Mini-14’s chambered in .222 Rem. one of the model’s rarest variants.

Latest

Century Arms AP51 & AP53 guns left-side arrangement of three pistols shown with optics
Century Arms AP51 & AP53 guns left-side arrangement of three pistols shown with optics

New For 2025: Century Arms AP51 & AP53

Century Arms has expanded its AP5 line of roller-delayed blowback firearms with the new AP51 and AP53 handguns based on the Heckler & Koch G3 and HK33, respectively.

Preview: InfernoWare Shield

InfernoWare Shield is a spray-applied coating designed to protect firearm and other components from heat and contact damage.

Charles Hiltunen Elected As 76th NRA Director

Charles Hiltunen has been elected by the members to a one-year term ending in 2026.

Comparing Factory .38 Spl. Wadcutter Loads With A Smith & Wesson Model 686 Plus

A common choice for classic competition, the factory wadcutter load can prove to be a top target load while also mitigating the effects of strong recoil due to its reduced velocity.

Preview: XS Sights Standard Dot Revolver Front Sight Smith & Wesson

XS Sights has a solution for owners of Smith & Wesson J-frames, such as the 640 and 340 PD, that have front sights attached with a single pin and fixed rear sights.

New Guns & Gear At The 2025 NRA Show

The 154th NRA Annual Meetings & Exhibits, held at the Georgia World Congress Center, April 24-27, was teeming with new guns and gear. Here's a taste of what you can see on the show floor.

Interests



Get the best of American Rifleman delivered to your inbox.